When compared to automatic transmission cars, manual transmission cars are considered more difficult to control because they require the user to perform many operations at the same time. nuoc lam mat dong co toyota The article below will provide drivers with some necessary information about manual transmission cars and how to drive properly to bring about the best journeys.
What is a manual transmission car?
A manual transmission vehicle, also known as Manual Transmission (MT), is a vehicle with five or six gears that engage each other by pressing the clutch pedal and manipulating the gear lever. Therefore, unlike automatic transmissions, manual transmission cars require human control to change gears.

What is a manual transmission car?

Functions of clutch - brake - accelerator for manual transmission vehicles
The driver's seat area of ​​a manual transmission vehicle will include three pedals arranged in order from left to right: clutch pedal - brake pedal - accelerator pedal.

Clutch pedal (also known as clutch pedal): Is a pedal that controls the connection between the engine and gearbox.
Brake pedal: Is the pedal that controls the vehicle's braking system
Accelerator: Is the pedal used to control the speed of the vehicle
Meaning of symbols on the gear lever of a manual transmission car
Basically, manual transmission cars use the following symbols:

Number symbols 1, 2, 3, 4, 5, 6: Progressive numbers
Symbol R (Reverse): Reverse number
Number symbol 0 or N (neutral): Intermediate number
How to put a car in manual gear quickly and technically
Unlike automatic transmission vehicles, symbols for manual transmission vehicles will be printed directly on the lever handle with a characteristic H-shaped diagram. If you want to use the car, the driver needs to take the following steps

Step 1: Step on the clutch

Step 2: Enter gear

There are differences between car models (basic, new, high-end) when entering gear. As follows:

Step 3: Release the clutch gently and gently step on the accelerator

Instructions on how to drive a manual transmission car with 15 basic steps
Step 1: Sit in the driver's seat and fasten your seat belt properly

How to drive a manual transmission - step 1

Step 2: Understand the operating principles of the clutch/cone

How to drive a manual transmission - step 2

Step 3: Adjust the seat to the appropriate position

How to drive a manual transmission - step 3

Step 4: Press and hold the clutch pedal close to the floor

How to drive a manual transmission - step 4

Step 5: Return the gear lever to the center position

How to drive a manual transmission - step 5

Step 6: Hold the clutch and start the car

How to drive a manual transmission - step 6

Step 7: Once the car has started, you can release the clutch but still keep the gear lever in the center position

How to drive a manual transmission - step 7

Step 8: Continue pressing the clutch pedal and shift the gear lever to number 1

How to drive a manual transmission - step 8

Step 9: Release the handbrake and gently release the clutch according to proper driving technique to get the car moving

How to drive a manual transmission - step 9

Step 10: Release the clutch and lightly press the accelerator

How to drive a manual transmission - step 10

Step 11: Depress the clutch, shift the gear lever to number 2 when the engine revs from 2,500 to 3,000 rpm

How to drive a manual transmission - step 11

Step 12: Release the clutch and press the accelerator pedal

How to drive a manual transmission - step 12

Step 13: Repeat stepping on the accelerator and releasing the clutch

How to drive a manual transmission - step 13

Step 14: Let go of the gas, step on the brake, and press the clutch if you want to stop the car

How to drive a manual transmission - step 14

Step 15: Once you have mastered the above steps, driving a manual car is no longer a difficult task

How to drive a manual transmission - step 15

Instructions on how to park a manual transmission vehicle
To safely park a manual transmission vehicle, nuoc lau kinh o to vehicle drivers need to follow the following driving techniques:

Step 1: Switch your right foot from the accelerator to the brake pedal to gradually slow the car down.
Step 2: When the car is about to stop, use your left foot to press the clutch to avoid the car jerking or suddenly shutting down.
Step 3: When the car stops completely, put the gear lever to N, then pull the handbrake and turn off the car engine.
Besides normal parking, Vietnam's terrain, which is ¾ mountainous, also requires drivers to have skills in parking on slopes. The method many people choose to use in this situation is to use a hard object such as a rock or log to block behind the wheel.

Park your car facing uphill on a sidewalk

The driver should park the vehicle 20-30 cm from the curb, turn the steering wheel to the left and then slowly back away so that the right front wheel touches the sidewalk and does not need to return the steering wheel to its original position. Then pull the handbrake, turn off the engine and shift to P or 1.

Park your car facing uphill on a road without a sidewalk

The biggest difference in this driving technique when compared to parking on a sidewalk is that the driver will drive to the right instead of left. In case of a slippage, the vehicle will run backwards to avoid colliding with people and vehicles on the road.

Park the car facing downhill

The driver needs to turn the steering wheel all the way to the right, block the wheel with a high edge or park the car in a location away from the road. For vehicles equipped with a manual transmission, you should engage reverse gear while using the vehicle's handbrake instead of using first gear as when parking the vehicle facing uphill.

Instructions on how to reverse a car with a manual transmission
Manual transmission cars require the driver to have smooth coordination between clutch, gear and throttle. nuoc lam mat mau xanh Therefore, to safely reverse a manual transmission vehicle, you need to perform the following steps sequentially:

Step 1: Stop the car and turn on the signal lights
Before preparing to reverse, you need to stop the vehicle completely by stepping on the brake pedal and turning on the signal lights to warn other vehicles in circulation, avoiding causing unnecessary accidents.

Step 2: Set reverse gear
The driver sets reverse gear by stepping on the clutch and brake pedal and pulling the gear lever to position R, then begins stepping on the accelerator.

Step 3: Observe
The rearview mirror needs to be adjusted to the appropriate position to obtain the widest view. In addition, the driver also needs to pay attention to blind spots in positions such as the left and right front of the vehicle, the middle of the front vehicle, the left and right rear tires, and the rear of the vehicle.

In order for the driver to be able to make more objective judgments, the vehicle should be equipped with a reversing camera to assist with observation and an RCTA system to warn of rear cross-traffic vehicles.

Step 4: Control the steering wheel in the right direction
"Left is right, right is left" is the rule that the person holding the steering wheel needs to remember and follow during the process of reversing the car. Specifically, if you want the car to move left, the driver needs to turn the steering wheel to the right and vice versa, turn the steering wheel to the right to move the car back to the left. In case you want to reverse straight, the driver just needs to keep the steering wheel in a stable position.

Step 5: Drive slowly
How to reverse a manual transmission car requires the driver to use reverse gear - the strongest gear in the transmission. Therefore, during the process, the driver needs to drive slowly so that the vehicle can move in the right direction as well as to prevent unexpected situations that may occur.

How to reverse a manual transmission car

*Note: During the process of reversing the car, the driver needs to keep his foot on the brake pedal in case he encounters an obstacle or incident that could cause the driver to panic/lose his temper and mistakenly press the accelerator pedal.